Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 8

Bearbeitet von Stefan Lewis

Bearbeitung genehmigt von Stefan Lewis



[title] Reassembling the Heater - Part III
[* red] Take the smaller cable as mention earlier and connected to back to the Circuit Board
[* icon_note] You might have to lean over to get a good line of sight since its going to be a challenge.
[* icon_note] I recommend getting the plug in the connector and then using a free hand with a flat head and careful pushing the tip of the flat head on the back of the connector and using it in.
[* orange] The Connection on the other side.

Bild 1

Kein vorheriges Bild