Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Andrew Klatt -

Bearbeitung genehmigt von Andrew Klatt

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Locate the Philipsphillips head screws holding the highlighted plastic shield in place.
[* orange] Remove the two 14mm screws with a Philipsphillips head screwdriver.
[* black] Carefully slide the shield out of place along the power chord. Andcord and set it aside.
[* red] Locate the Philipsphillips head screws holding the highlighted plastic shield in place.
[* orange] Remove the two 14mm screws with a Philipsphillips head screwdriver.
[* black] Carefully slide the shield out of place along the power chord. Andcord and set it aside.