Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Elliot Kane -

Bearbeitung genehmigt von Elliot Kane

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* icon_noteblack] The two speakers are attached to each other with a cord that is threaded along the side of the casingcasing. Gently pull the wire out
[* icon_cautionicon_note] The cord is secured under two pieces of tape with multiple other wires. Make sure that you are only removingremove the wire connectedconnecting the speakers.
[* icon_reminder] Keep in mind that when replacing the wires, you will need
to both speakerssecure the tape again. Accordingly, be careful not to tear the tape when peeling it.
[* icon_noteblack] The two speakers are attached to each other with a cord that is threaded along the side of the casingcasing. Gently pull the wire out
[* icon_cautionicon_note] The cord is secured under two pieces of tape with multiple other wires. Make sure that you are only removingremove the wire connectedconnecting the speakers.
[* icon_reminder] Keep in mind that when replacing the wires, you will need
to both speakerssecure the tape again. Accordingly, be careful not to tear the tape when peeling it.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version