Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Emily Cone

Bearbeitung genehmigt von Emily Cone

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* icon_caution] Do not proceed without holding the laptop screen/lid for support. The screen is very heavy and may cause the device to fall if not held and supported.
[* black] Lift up on the two cables with the gold ends connected to the I/O board to disconnect them.
[* red] Use a Phillips #0 to unscrew the two 5mm screws from the right side of the screen base.
[* orange] Use a Phillips #0 to unscrew the two 5mm screws from the left side of the screen base.