Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 5

Bearbeitet von David Jalufka

Bearbeitung genehmigt von David Jalufka

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] To reassembleIn reassembling the wheel to the bike, perform the steps in reverse order.
[* black] You may need to spreadWith the fork slightly to getaxle all the axleway into the dropouts.
[* black] Make sure that
fork slots, tighten the quick release skewer tightens ontolever into the fork endsend securely. If you loosened it by unscrewing it, you will need to turn it to tighten it. The lever It should take a modest amount of pressureforce to tighten,tighten but not an excessive amount. Adjust by tightening or loosening the quick release.
[* black] Be sure the axle is all the way into the fork slots.

[* black] Squeeze the brake calipers together and replacereturn the cable noodle back into the holder. Check you
[* black] Sit on your bike and test your
brake to be sure it works before riding off!for functionality.
[* black] To reassembleIn reassembling the wheel to the bike, perform the steps in reverse order.
[* black] You may need to spreadWith the fork slightly to getaxle all the axleway into the dropouts.
[* black] Make sure that
fork slots, tighten the quick release skewer tightens ontolever into the fork endsend securely. If you loosened it by unscrewing it, you will need to turn it to tighten it. The lever It should take a modest amount of pressureforce to tighten,tighten but not an excessive amount. Adjust by tightening or loosening the quick release.
[* black] Be sure the axle is all the way into the fork slots.

[* black] Squeeze the brake calipers together and replacereturn the cable noodle back into the holder. Check you
[* black] Sit on your bike and test your
brake to be sure it works before riding off!for functionality.