Änderungen an Schritt Nr. 3
Bearbeitet von drewsof –
Bearbeitung abgelehnt von Adam O'Camb
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Allow the lower EMI shield to hang down from the display. | |
| [* red] Remove the four 7.5 mm T10 Torx screws securing the display to the rear case. | |
| - | [* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit drivers are too short to reach these screws. |
| + | [* icon_note] The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit drivers, including those from iFixit are too short to reach these screws. |