Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Bernice Nunez -

Bearbeitung genehmigt von Bernice Nunez



[* black] Once the device is heated, place a suction cup near the bottom of the back of the device Make sure it is placed on the flat part of the glass
[* icon_caution] Be careful holding the device after heating the back, it may burn!
[* black] Gently pull upwards on the suction cup to separate the rear glass from the body of the phone.
[* black] While pulling upwards, insert a pick under the rear glass

Bild 1

Kein vorheriges Bild