Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 2

Bearbeitet von Isaiah Abrea -

Bearbeitung genehmigt von Isaiah Abrea

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Use the screw driver with the 4.0 flathead bit to pry off the rubber bottom cover. It will be glued onto the bottom of the speaker.
[* black] Work the rubber cover off by slowly going all the way around with the metal spudger, applying as much force as needed.
[* black] Work the rubber cover off by slowly going all the way around with the metal spudger, applying as much force as needed.
[* icon_note] Since the cover is glued, a heat gun at low temperature or a hair dryer may be useful to speed up the process. However it is not required in this step.

Bild 1

Gelöscht