Änderungen an Schritt Nr. 8
Bearbeitet von Caroline Padilla -
Bearbeitung genehmigt von Caroline Padilla
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Flip device 180 degrees so the light ring/button panel is on top with the 'Elite' facing you. |
| [* red] Remove one 6 mm screw with a PH2 screw driver. |
| [* red] Remove one 6 mm screw with a PH2 screw driver. |
| [* black] Spin the device so the opposite side is facing you. |
| [* orange] Remove two 6 mm screws with a PH2 screw driver. |
| [* orange] Remove two 6 mm screws with a PH2 screw driver. |