Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 4

Bearbeitet von Hans -

Bearbeitung genehmigt von Hans

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[title] Outer casing
[* black] There is a rubber grommet that keep moisture away from the inside of the board.
[* black] There IS also this sillica pack inside the camera if moisture ever breach in.
[* black] The base is fixed to the feet using a single Phillips #1 screw
[* icon_caution] In order to separate the camera from the feet, you will need to undo the connector. The wires are thin so be careful.