Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von Cameron Dunn -

Bearbeitung genehmigt von Cameron Dunn

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* blackred] Point the timing light at the timing scale and begin use
[*

[*
black] YouThe light will be able to make outstrobe when the cylinder fires and a numbermark on the crank shaft pulley will become visible.
[* black] The mark will appear next to the timing scale. The mark next to the timing
scale indicates where the timing is currently set.
[* black] There are numbers on the scale, although they may be faded, and your timing value will likely be in between the marked values
[* blackred] Point the timing light at the timing scale and begin use
[*

[*
black] YouThe light will be able to make outstrobe when the cylinder fires and a numbermark on the crank shaft pulley will become visible.
[* black] The mark will appear next to the timing scale. The mark next to the timing
scale indicates where the timing is currently set.
[* black] There are numbers on the scale, although they may be faded, and your timing value will likely be in between the marked values
[* black] The scale contains major marks at 0, 8, and 16 with minor marks at 8 and 12
[* black] All models will have differing ideal timing values depending on the year and transmission.
[* black] Our model-year was 1965 which has an ideal timing value betweenof 14 (in between 12 and 16 marks)
[* black] All models will have differing ideal timing values depending on the year and transmission.
[* black] Our model-year was 1965 which has an ideal timing value betweenof 14 (in between 12 and 16 marks)
[* black] For other model-years, consult the list of timing values provided
[* black] List of Distributor models and timing values found here: http://autoxer.skiblack.com/nallm/disdata.jpg
[* black] Take note of the value

Bild 1

Kein vorheriges Bild

Hinzugefügt