Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 6

Bearbeitet von Noah -

Bearbeitung genehmigt von Noah

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Now that you know what your timing is currently set to, and you have looked up what it should be set at, you are ready to adjust the distributor to correct any differences.
[* black] Grab the distributor and, while watching the timing mark as explained previously, rotate it slowly'''''slowly''''' to one side or the other. Continue rotating until the timing mark is in the correct position.
[* black] Carefully tighten the 9/16 locking nut, and remove the wrench, making sure not to accidently rotate the distributor.
[* black] Grab the distributor and, while watching the timing mark as explained previously, rotate it slowly'''''slowly''''' to one side or the other. Continue rotating until the timing mark is in the correct position.
[* black] Carefully tighten the 9/16 locking nut, and remove the wrench, making sure not to accidently rotate the distributor.