Repariere deine Sachen Community Store

Änderungen an Schritt Nr. 2

Bearbeitet von Kristen Gismondi –

Bearbeitung genehmigt von Kristen Gismondi

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_caution] Be careful to not damage the battery during this step. If it appears you are using too much force to separate the battery from the frame, you may need to heat the phone to soften the adhesive holding the battery to the phone.
[* black] Starting at the bottom left corner of the battery, use the wide end of the spudger as a wedge to get underneath the battery.
-[* black] Insert a plastic pry tool into the space created by the spudger and CAREFULLY begin to pry around the edge of the battery.
+[* black] Insert a plastic opening tool into the space created by the spudger and CAREFULLY begin to pry around the edge of the battery.
[* black] Once the battery is separated for enough from the phone, use your hands to fully remove the battery, using the wide end of the spudger to scrape off adhesive where necessary.