Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von mashton27 -

Bearbeitung genehmigt von mashton27

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Place the plastic opening tool between the plastic cover and the mount on the printer.
[* black] Pry the plastic cover towards the center of the printer.
[* black] Pull up on the cover to remove it from the printerprinter-as shown.
[* black] Do this for both sides ofRepeat process on the cover.
[* black] Show pulling the lid off
other side.
[* black] Pull up on the cover to remove it from the printerprinter-as shown.
[* black] Do this for both sides ofRepeat process on the cover.
[* black] Show pulling the lid off
other side.