Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Emily Gillo -

Bearbeitung genehmigt von Emily Gillo

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Pry open the back case to get to the back cover.
-[* red] Remove eight 5mm screws with a PH0 screwdriver.
-[* black] Pry open the back cover with a plastic opening tool.
-[* black] Slide the plastic opening tool alongside the side seam twisting your hand forcefully to open the back cover.
-[* icon_note] Pry open by finding an edge and forcing it open with the plastic opening tool.
+[* black] Use a plastic opening tool to pry open the back case.
+[* red] Use a #0 Phillips screwdriver to remove the eight 5mm screws shown in the photo.
+[* black] Use a plastic opening tool to pry open the back cover.
+[* icon_reminder] Place the screws in a safe place. You will need these for reassembly.