Änderungen an Schritt Nr. 4
Bearbeitet von Zachary Sabo –
Bearbeitung genehmigt von Justin Ogihara
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* red] Use a #10 Torx screwdriver to remove two 10 mm screws from the board attached to ports. |
|---|---|
| + | [* red] Use a #10 Torx screwdriver to remove two 10 mm screws from the board that is attached to the ports. |
| [* black] Pull board up lightly. |