Änderungen an Schritt Nr. 4
Bearbeitet von matthew pennell –
Bearbeitung genehmigt von matthew pennell
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Remove the locking pin | |
| - | [* black] Place your 17mm socket on the bolt side and the 1 inch side over the |
| + | [* black] Place your 17mm socket on the bolt side and the 1 inch side over the nut |
| [* icon_note] This is where the breaker bar would help as it could be very tight | |
| [* black] Loosen the bolt to about half way | |
| - | [* icon_caution] Do not take the bolt out or the |
| + | [* icon_caution] Do not take the bolt out or the nut off |