Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Alex Kost -

Bearbeitung genehmigt von Alex Kost

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Begin by removing the keyboard16 mm Phillips #0 screw. The screw can easily be identified by the two notches next to the left of the screw.
[* red] Begin by removing the keyboard16 mm Phillips #0 screw. The screw can easily be identified by the two notches next to the left of the screw.
[* black] Push up the bottom of the keyboard by poking your finger through the hole to the right of the yellow bios battery. You will feel slight resistance.
[* icon_caution] Be sure to not lift the keyboard too far. It is still attached to the computer with a ribbon connector.