Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Andrew Optimus Goldheart -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* red] Begin by removing the two (2) black 16 mm Phillips #0 screws. The screws can be identified by the two notches next to each screw. One (marked in red) is near the battery lock and the other on adjacent(not pictured) is next to the WiFiWi-Fi cover.
[* red] Begin by removing the two (2) black 16 mm Phillips #0 screws. The screws can be identified by the two notches next to each screw. One (marked in red) is near the battery lock and the other on adjacent(not pictured) is next to the WiFiWi-Fi cover.
[* black] Push up the bottom of the keyboard by poking your finger through the hole to the right of the yellow bios battery. You will feel slight resistance.
[* icon_caution] Be sure to not lift the keyboard too far. It is still attached to the computer with a ribbon connector.