Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 3

Bearbeitet von Ken

Bearbeitung genehmigt von Ken

Gelöscht
Hinzugefügt
Unverändert

Schritt-Zeilen

[* black] Tighten the drain plugplug using the 10mm hex.
[* black] Tighten the drain plugplug using the 10mm hex.
[* red] Fill the transfer case with the ATF oil using the vacuum oil pump. When the case is full, oil will begin dripping out of the fill hole.
[* black] When the case is full,Insert and tighten the fill plugfiller plug using the 10 mm hex.
[* icon_reminder] Be careful to line up each plugsplug carefully to prevent cross-threading.Docross-threading. Do not overtighten the plugs, as overtightening may cause the threads to strip.
[* icon_note] Due to limited resources the transfer case oil was not actually changed.
[* black] When the case is full,Insert and tighten the fill plugfiller plug using the 10 mm hex.
[* icon_reminder] Be careful to line up each plugsplug carefully to prevent cross-threading.Docross-threading. Do not overtighten the plugs, as overtightening may cause the threads to strip.
[* icon_note] Due to limited resources the transfer case oil was not actually changed.