Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Eric D

Bearbeitung genehmigt von Eric D

Vorher
Nachher
Unverändert

Schritt-Zeilen

+[* black] Use a thin piece of plastic, spudger, or fingernail (if you have them) to lift up the edge of the grip, and pull up slowly.
+[* black] Repeat for the other two grips
+[* icon_note] The large one on the battery-side is the easiest to start with. This is required to remove the front & back panels
+[* icon_note] The small one on the back is a bit difficult to get started, but not really difficult to remove.
+[* icon_note] The one on the AV panel will be easier if you open up the AV port cover.

Bild 1

Kein vorheriges Bild

Hinzugefügt