Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Peter Wilson -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_note] Gently fold the display over away from the rest of the iPod, taking care not to disconnect or break any of the ribbon cables. Set the two halves flat on a table or bench.
[* black] Use a plastic opening tool to pry the home button switch up from the LCD plate.
+ [* black] It may be necessary to use a heat gun or hair dryer to soften the adhesive on the back of the home button. Always use a low heat setting.
[* icon_caution] Do not attempt to remove the home button switch, as it is connected to components below the LCD plate.