Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Eric Volbrecht -

Bearbeitung abgelehnt von Scott Havard

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Warm back of iPod with heat gun or hair dryer
[* black] There are two strips of adhesive keeping the battery in place.
+ [* black] Some of the iPod Touch 6th Gen will have the battery pull tabs similar to what you would find in the iPhone 5C/5S and 6 Series. if you attempt to pry on these the battery will bend and likely break. Pictures of blue iPod will show tabs
+ [* black] To remove these tabs be sure to heat the back of the housing and pull the tabs slowly as they are prone to breaking. The tabs are located on the lower right side of the battery next to loud speaker and upper left side by where the battery plugs into the motherboard (this is going to be difficult to get out) View the pictures of blue iPod.
[* black] Turn the iPod over and heat the BACK of the aluminium iPod case. ''Do not heat the battery''.
[* black] The aluminium case does ***not*** have to be hot; you should always be able to touch heated parts with your fingers at all times without it being uncomfortable.

Bild 2

Kein vorheriges Bild

Hinzugefügt

Bild 3

Kein vorheriges Bild

Hinzugefügt