Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Andrew Optimus Goldheart -

Bearbeitung genehmigt von Andrew Optimus Goldheart

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Flip the logic board assembly back over to expose the connectors on the back.
[* black] Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board.
-[* icon_caution] This cable is very delicate, be careful not to stress the point where it connects to the antenna.
+[* icon_caution] This cable is very delicate; be careful not to stress the point where it connects to the antenna.