Änderungen an Schritt Nr. 4
Bearbeitet von Akash Kedia –
Bearbeitung genehmigt von Akash Kedia
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [* black] Separate the wrapped battery stack from the body by pulling up on the wire. |
|---|---|
| + | [* icon_note] You may need to use the flat end of the nylon spudger to separate the battery. |
| + | [* icon_note] The stack is attached using glue, so you might hear a pop when removing it. |
| + | [* icon_reminder] Reapplying an adhesive may be necessary to keep a replacement battery in place. |
Bild 1
Kein vorheriges Bild
Hinzugefügt