Änderungen an Schritt Nr. 4
Bearbeitet von Akash Kedia –
Bearbeitung genehmigt von Akash Kedia
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* black] Separate the wrapped battery stack from the body by pulling up the wire. | |
| [* icon_note] You may need to use the flat end of the nylon spudger to separate the battery. | |
| [* icon_note] The stack is attached using glue, so you might hear a pop when removing it. | |
| - | [* icon_reminder] Reapplying an adhesive |
| + | [* icon_reminder] Reapplying an adhesive to the bottom of the battery is recommended, although not necessary, to keep it in place. |