How to fix broken power button ribbon Schritt Nr.3 Verlauf

Änderungen an Schritt Nr. 3

Bearbeitet von Taylor Dixon – 20. Feb 2020

Bearbeitung genehmigt von Taylor Dixon

	[title] Power Button fix
-	[* black] Solder the two wires to the right side of the power button as displayed in the picture. You may cut the ribbon, as you will no longer need that part. ~~Note: The wires has no polarity. You can use either soldering points. Also my wires are different color because I ended up using longer wires from the first shot.~~
-	[* ~~black~~] Note: The wires has no polarity. You can use either soldering points. ~~Also my wires are different color because I ended up using longer wires from the first shot.~~
+	[* black] Solder the two wires to the right side of the power button as displayed in the picture. You may cut the ribbon, as you will no longer need that part.
+	[* icon_note] Note: The wires has no polarity. You can use either soldering points.
	[* black] This is your new functional power button. It will not display a green LED anymore but it will work as normal otherwise.
	[* black] You may now put back your fixed controller together.