Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 2

Bearbeitet von Patrick -

Bearbeitung genehmigt von Patrick



+[* black] Gently heat the top of the phone to soften the adhesive. Use a suction cup to lift the display and insert opening picks.
+[* black] Starting from the top, separate the display from the frame.
+[* icon_note] The display cable is attached to the bottom half the display.
+[* black] There is a thin flexible plastic frame between the main phone frame and the glass. Check if the replacement part has this frame included.
+[* black] For reassembly, B7000 adhesive is recommended over TESA adhesive tape due to the tight tolerances .

Bild 1

Kein vorheriges Bild