Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von jmorri04 -

Wartet auf Freigabe

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] The ribbon cable is attached to the bottom right hand side (when the Zune is facing down) of the logic board.
-[* yellow] Use the small flat head screw driver to lift the brown clamp.
+[* blue] Use the small flat head screw driver to lift the brown clamp.
[* green] The brown clamp will release the ribbon cable, and you should be able to pull the battery away from the case.

Bild 1

Alte Version

Neue Version