Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Änderungen an Schritt Nr. 1

Bearbeitet von Michael Cioffi

Bearbeitung genehmigt von Michael Cioffi

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* black] Measure top and bottom of damaged section.
[* icon_note] When replacing a corner bead, you must measure at least 1.5 inches from the corner.
[* black] Use a straight edge between the the top and bottom and draw a straight-line connecting the marking.
[* icon_reminder] You can even use the putty knife if the damage section is not too long.
[* black] Mark with a pencil, or cut lightly with utility knife.
[* black] Mark with a pencil, or cut lightly with utility knife.
[* icon_caution] Use caution when using the utility knife as the blade is very sharp and may cause an injury.