Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Gerardo Longoria -

Bearbeitung genehmigt von Arthur Shi

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Attaching additional strut channel
[* yellow] This is what the attached strut channel connector looks like from above.
[* black] Place two additional spring strut channel nuts into the aluminum strut channel to be attached.
[* blue] Insert the last two washers and screws into the nuts.
-[* green] Use an impact driver to secure the screws into place.
+[* green] Use an impact driver to secure the screws into place. The impact driver should have a 3/4 '' Socket connected via a socket adapter.
+[* icon_note] [https://www.grainger.com/product/4WM52?gclid=Cj0KCQjwjrvpBRC0ARIsAFrFuV9yMypbLFfdAK8_jOB9YNZ_pXSaUFXiQEQohNLkncCkOZmxe9PghyUaAsmvEALw_wcB&cm_mmc=PPC:+Google+PLA&ef_id=Cj0KCQjwjrvpBRC0ARIsAFrFuV9yMypbLFfdAK8_jOB9YNZ_pXSaUFXiQEQohNLkncCkOZmxe9PghyUaAsmvEALw_wcB:G:s&s_kwcid=AL!2966!3!50916772557!!!g!82128472197!|Socket Adapter]
[* red] This is what the extended strut channel looks like.