Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 5

Bearbeitet von Gerardo Longoria -

Bearbeitung genehmigt von Brendan

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Attaching the node
-[* yellow] Place two screws into the node enclosure with the washer and strut channel nuts on the backside.
+[* yellow] Place two screws into the node enclosure with the 5/16'' washer and strut channel nuts on the backside.
[* icon_note] You can remove the strut channel nut spring to make installation easier.
[* blue] Slide the node into the strut channel arm.
[* icon_note] The washer should be on the outside of the strut channel and the strut channel nut should be on the inside.
[* green] Tighten the screws with a 3/8 inch wrench.