Änderungen an Schritt Nr. 1
Bearbeitet von Jesus Perez -
Bearbeitung genehmigt von Jesus Perez
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
[* black] Having the plastic opening tool in hand, you can now start to remove the screen portion of [* icon_caution] You will be prying the screen half of [* red] A good place to start prying is near, but not in, the headphone jack. Insert a medium to large plastic opening tool into the crevice, located on the back, between the two portions of [* icon_note] [* blue] Push the top of plastic opening tool away from you so that the hook end of the tool can separate the two halves of [* icon_note] Pry each side equally so that your kindle does not bend in the process. [* black] As the gap between the halves of |
[* black] Having the plastic opening tool in hand, you can now start to remove the screen portion of [* icon_caution] You will be prying the screen half of [* red] A good place to start prying is near, but not in, the headphone jack. Insert a medium to large plastic opening tool into the crevice, located on the back, between the two portions of [* icon_note] [* blue] Push the top of plastic opening tool away from you so that the hook end of the tool can separate the two halves of [* icon_note] Pry each side equally so that your kindle does not bend in the process. [* black] As the gap between the halves of |
[* icon_note] Before pulling the two halves apart, proceed to step 2 to successfully detach them from one another. |