Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 18

Bearbeitet von Nicholas Dukeman

Bearbeitung genehmigt von Nicholas Dukeman

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Carefully peel up the tape securing the connector on the back of the display bezel.
+[* black] Carefully peel up the tape securing the connector on the back of the display panel.
[* black] Remove the connector from its socket by carefully pulling straight back on the tape.
-[* black] If the flat part of the cable is stuck to the display bezel, slowly pull it up to break the adhesive.
+[* black] If the flat part of the cable is stuck to the display panel, slowly pull it up to break the adhesive.