Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von Ryan Charles Skibicki -

Bearbeitung genehmigt von Ryan Charles Skibicki

Vorher
Nachher
Unverändert

Schritt-Zeilen

[* icon_note] Be sure to use gloves or tools because metal is sharp along the edge.
+[* black] On the underside of the motherboard locate the heat shield which is located between the two fans near the top of the motherboard.
[* black] Remove the heat shield using an opening pick by lifting along the edges.
-[* red] Remove the 4 (T5) screws.
+[* red] Located in each corner of the heat sink mounting frame, remove all 4 (T5) screws.
[* black] Carefully lift off the heat sinks from the motherboard.