Änderungen an Schritt Nr. 2
Bearbeitet von Justin Ogihara –
Bearbeitung genehmigt von Justin Ogihara
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| [* icon_note] In this step, you will melt the adhesive around the outside of the screen. | |
| - | [* black] Microwave the iOpener Device for 30 seconds. |
| - | [* icon_caution] Be careful, the iOpener will be very hot. |
| - | [* black] Lay the clear side of the iOpener down on the outer edge of the screen to melt the adhesive. |
| - | [* icon_caution] Make sure to wait two minutes before microwaving the iOpener again so as to prevent it from bursting. |
| + | [* black] Microwave the iOpener Device for 30 seconds. For more instructions on how to properly use the iOpener, please read through our [guide|11677|iOpener instructions]. |
| + | [* black] Lay the clear side of the iOpener down on the outer edge of the screen to melt the adhesive. |
| + | [* icon_caution] Make sure to wait two minutes before microwaving the iOpener again so as to prevent it from bursting. |