Änderungen an diesem Schritt
Bearbeitet von Kalei Hubert-Mclennan –
Bearbeitung genehmigt von Kalei Hubert-Mclennan
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [* black] Use the metal spudger to separate the back cover. |
|---|---|
| - | [* black] Slide the plastic opening tool around the perimeter of the device, starting at the memory card slot. |
| - | [* black] ***Note that your hand can also be used to remove the back of the device if the backing in loose enough*** |
| - | [* black] ''The first picture shows the action of removing the cover using the plastic opening tool . The second picture shows the internal portion of the device once the back cover is removed.'' |
| + | [* black] Use 1 mm flathead screwdriver to remove the 2mm OEM screws from the front cover of the device. |