Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Änderungen an Schritt Nr. 8

Bearbeitet von Taylor Dixon -

Bearbeitung genehmigt von Taylor Dixon

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Loosen the motherboard
[* black] Insert the point of a spudger underneath the motherboard, near the rear-facing camera module.
[* black] Pry up gently to loosen the motherboard from its recess.
[* [* black] If the motherboard is not budging, make sure you have disconnected all the connectors.
[* [* black] If the motherboard is not budging, make sure you have disconnected all the connectors.
[* black] The motherboard has to [https://d3nevzfk7ii3be.cloudfront.net/igi/41flT2pB1Z1sRTmr.full|squeeze past the earpiece speaker cable|new_window=true]. If too much pressure is put on the earpiece cable, the earpiece speaker will pop open. You can prevent this by pressing on the earpiece module with a finger while you maneuver the motherboard out.
[* blackicon_note] If the earpiece speaker pops openopen (as shown in the third photo of this step), carefully align and fold the earpiece module back in place.
[* blackicon_note] If the earpiece speaker pops openopen (as shown in the third photo of this step), carefully align and fold the earpiece module back in place.