Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 3

Bearbeitet von Devyn Perry -

Bearbeitung genehmigt von Devyn Perry

Vorher
Nachher
Unverändert

Schritt-Zeilen

-[* black] Now begin to slowly remove the microphone.
-[* violet] The camera is also attached to the microphone wire. In order to remove the microphone, one must remove the camera as well.
+[* black] Slowly remove the microphone.
+[* red] The camera is also attached to the microphone wire. In order to remove the microphone, one must remove the camera as well.
[* icon_note] The camera is only held down with adhesives, so there is no need to use any tools.
-[* light_blue] You can see that it attached to a wire that goes around the entire display screen. Slowly finesse the wire out from the display component.
-[* orange] Once the microphone wire is free, you will now need to remove the chip component at the bottom of the display screen. Carefully remove the adhesive tape and take out the chip component.
+[* orange] You can see that it attached to a wire that goes around the entire display screen. Slowly finesse the wire out from the display component.
+[* yellow] Free the microphone wire,
+[* black] Remove the chip component at the bottom of the display screen.
+[* icon_caution] Carefully remove the adhesive tape and take out the chip component.

Bild 1

Alte Version

Neue Version

Bild 2

Alte Version

Neue Version