Zum Hauptinhalt wechseln

Änderungen an Schritt Nr. 1

Bearbeitet von koppie007 -

Bearbeitung genehmigt von koppie007



[title] Cut the plastic from the shell
[* black] Cut the plastic from the shell, aligned with red markers.
[* black] Use a cutter to cut the big pieces of plastic.
[* black] Use the cutter again to cut some plastic from the shell. This is required for the LCD to fit properly.
[* icon_note] Only cut the plastic that sticks out! It's possible that the red markers are not 100% accurate.
+[* icon_reminder] First things first, there are 2 GBA models. 32 pin motherboards and 40 pin motherboards, before you order anything, make sure which model you have. The GBA's starting with a 0 it's a 40 pin, if it start with a 1 it's a 32 pin. Please advise Google if you are not sure which model you have.