Nexus Q Ball Bearing Ring Replacement Schritt Nr.4 Verlauf

Änderungen an Schritt Nr. 4

Bearbeitet von Alexandra Millett – 9. Mär 2015

Bearbeitung genehmigt von Alexandra Millett

	[* red] Use a Phillips #0 screwdriver to unscrew the four 1.3 mm screws.
-	[* icon_note] ~~When you remove~~ the screws, ~~you~~ will ~~end up with~~ two parts. The top part contains the daughterboard~~, and you should place this off to the side~~. It will not be used ~~in this guide~~.
+	[* icon_note] After removing the screws, there will be two parts. The top part contains the daughterboard. Store it safely. It will not be used.