Änderungen an Schritt Nr. 2
Bearbeitet von Roberto Bartolacci –
Bearbeitung genehmigt von Roberto Bartolacci
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [title] Realease the fan |
|---|---|
| + | [* black] Detach the tape from the fan. |
| + | [* yellow] Disconnect the fan's ribbon connector. [guide|25629|It would be best if you follow this method|stepid=64970] but if you do not properly manage to grab the connector with your fingers, take two pairs of tweezers and grab the four wires as close as possible to the connector ─ as it is shown in the second picture ─ and pull them straight up resolutely. |
| + | [* blue] Using a PH #00 remove the two screws (M2.5×4.5) and group them together. |
| + | [* violet] Using a PH #00 remove the last screw (M2.5×6.5) that secure the fan to the top cover. Take notice of this screw because it is longer than the other two. |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt
Bild 3
Kein vorheriges Bild
Hinzugefügt