Änderungen an Schritt Nr. 23
Bearbeitet von Roberto Bartolacci –
Bearbeitung genehmigt von Roberto Bartolacci
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| + | [title] Secure the display cable with the adhesive stripe |
|---|---|
| + | [* black] Using a pair of tweezers remove the shield of the adhesive stripe. |
| + | [* blue] Then, using your fingers as shown in pic#2, attach the adshesive stripe over the connector and on the back of the display panel. ''While you are turning the stripe keep pushing the end of the cable straight forward as you just did to insert it in the connector.'' |
| + | [* icon_note] ''Note that if you still see a black empty line between the connector and the display cable as it is shown in pic#3 the cable is ++not ++correctly inserted. You have to the detach the adhesive and push it further inside!'' |
Bild 1
Kein vorheriges Bild
Hinzugefügt
Bild 2
Kein vorheriges Bild
Hinzugefügt
Bild 3
Kein vorheriges Bild
Hinzugefügt