Upgrade the display panel and replace the display cable Schritt Nr.23 Verlauf

Änderungen an Schritt Nr. 23

Bearbeitet von Roberto Bartolacci – 23. Jan 2020

Bearbeitung genehmigt von Roberto Bartolacci

	[title] Secure the display cable with the adhesive stripe
	[* black] Using a pair of tweezers remove the shield of the adhesive stripe.
-	[* blue] Then, using your fingers as shown in pic#2, attach the adshesive stripe over the connector and on the back of the display panel. ''~~While~~ you are turning the stripe keep pushing ~~the end of the cable~~ straight forward as you just did to insert it in the connector.''
-	[* icon_note] ''Note that if you still see a black empty line between the connector and the display cable as it is shown in pic#3 the cable is ++not ++correctly inserted. You have to the detach the adhesive and push it further inside!''
+	[* blue] Then, using your fingers as shown in pic#2, attach the adshesive stripe over the connector and on the back of the display panel. ''Try to mantain the connection tight: while you are turning the stripe, ++keep pushing it straight forward also++, as you just did to insert the cable in the connector.''
+	[* icon_note] ''Note that if you still see a black empty line between the connector and the display cable as it is shown in pic#3 the cable is ++not++ correctly inserted. You have to the detach the adhesive and push it further inside!''