Repariere deine Sachen Community Shop

Änderungen an Schritt Nr. 24

Bearbeitet von Roberto Bartolacci –

Bearbeitung genehmigt von Roberto Bartolacci

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Mount the new display panel
-[* icon_note] ''Take the display enclosure and, if it's necessary, remove the dirt using a brush or a vacum cleaner. Isopropyl alcohol would work well too but do not use it nearby the wifi antennas.''
-[* black] Put the display enclosure down on your working surface. Take the new display and lay it down inside its enclosure starting from the bottom, as it is shown in the pic#2. ''Once all of the pins that stand nearby the holes for the screws have passed through the metal tabs, the display panel is correctly positioned.''
-[* yellow] ''The webcam cable has to go behind the display tab.''
+[* black] Take the display enclosure and, if it's necessary, remove the dirt using a brush and a vacum cleaner. ''Isopropyl alcohol would work well too but do not use it nearby the wifi antennas which are on the top right corner.''
+[* black] Take the new display and turn it down on the enclosure starting from the bottom, as it is shown in pic#2. ''Once all of the pins which stand nearby the screws' threads have passed through the metal tabs, the display is correctly positioned.''
+[* yellow] ''The webcam cable goes behind the display tab.''
[* orange] Finally secure the new display to its enclosure remounting the four Phillips PM2.0×2.9 screws using a PH#00 screwdriver.