Upgrade the display panel and replace the display cable Schritt Nr.24 Verlauf

Änderungen an Schritt Nr. 24

Bearbeitet von Roberto Bartolacci – 23. Jan 2020

Bearbeitung genehmigt von Roberto Bartolacci

	[title] Mount the new display panel
-	[* black] Take the display enclosure and, if it's necessary, remove the dirt using a brush and a ~~vacum~~ cleaner. ''Isopropyl alcohol would work well too but do not use it nearby the wifi antennas which are on the top right corner.''
+	[* black] Take the display enclosure and, if it's necessary, remove the dirt using a brush and a vacuum cleaner. ''Isopropyl alcohol would work well too but do not use it nearby the wifi antennas which are on the top right corner.''
	[* black] Take the new display and turn it down on the enclosure starting from the bottom, as it is shown in pic#2. ''Once all of the pins which stand nearby the screws' threads have passed through the metal tabs, the display is correctly positioned.''
	[* yellow] ''The webcam cable goes behind the display tab.''
	[* orange] Finally secure the new display to its enclosure remounting the four Phillips PM2.0×2.9 screws using a PH#00 screwdriver.