Upgrade the display panel and replace the display cable Schritt Nr.28 Verlauf

Änderungen an Schritt Nr. 28

Bearbeitet von Roberto Bartolacci – 21. Jan 2020

Bearbeitung genehmigt von Roberto Bartolacci

	[title] Reassemble the display bezel
-	[* black] Remove the covers of the double sided tape and, once you have aligned it, lay the bezel down over the display assembly. ''First lay down the bottom on the hinges which will help you to centre the bezel and then let it turn down''
-	[* light_blue] Afterwards, starting from the middle of the bottom and going towards the short edges, snap the tabs of the bezel and press a little over the areas where the adhesive tape is. ''End the reassembly at the webcam.''
+	[* black] Remove the covers of the double-sided tape and, once you have aligned it, lay the bezel down over the display assembly. ''First lay down the bottom on the hinges which will help you to centre the bezel and then let it turn down''
+	[* light_blue] Afterwards, starting from the middle of the bottom edge and going towards the short edges, snap back into position all the tabs of the bezel and press a little over the areas where you laid the adhesive tape. ''End the reassembly at the webcam.''