Änderungen an Schritt Nr. 33
Bearbeitet von Roberto Bartolacci –
Bearbeitung genehmigt von Roberto Bartolacci
- Vorher
- Nachher
- Unverändert
Schritt-Zeilen
| - | [title] Place the antenna |
|---|---|
| + | [title] Place the wireless antenna cables back (2 of 2) |
| [* light_blue] Go on setting the cables in their channel built between speaker and subwoofer. ''Use a spudger to easily order and push the antenna wires and the other cable inside the two metal clips.'' | |
| [* green] Attach the adhesive stripe that hold the wires back over the mother board. | |
| [* black] Once the wifi antenna cables are have been correctly routed, connect them back to the wifi and bluetooth module. Place the golden end of each wire over its coaxial connector and simply press them down forcefully using a spudger. ''They will loudly snap into the connectors. Look at pic#3 in order not to mix the cables up!'' |