Upgrade the display panel and replace the display cable Schritt Nr.35 Verlauf

Änderungen an Schritt Nr. 35

Bearbeitet von Roberto Bartolacci – 22. Jan 2020

Bearbeitung genehmigt von Roberto Bartolacci

	[title] Reconnect the display cable to the mother board (2 of 2)
-	[* orange] Lay the display cable end ~~down,~~ inside the connector. ''It is right positioned when its two indentations have passed the two small black "squares" at the edges of the ZIF connector and when the white line visually creates a single line with the latter ones. ''
+	[* orange] Lay the display cable end inside the connector. ''It is right positioned when its two indentations have passed the two small black "squares" at the edges of the ZIF connector and when the white line visually creates a single line with the latter ones. ''
	[* black] Then keeping the cable positioned with one hand, push down the locking flap of the connector using a spudger with the other hand. ''This operation has not to be done in one single movement. Start pressing in the middle of the flap. ''
	[* black] Once the flap of the connector is locked, reattach the adhesive tape, which is also helding two other wires, over the connector.