Repariere deine Sachen Community Shop

Änderungen an Schritt Nr. 36

Bearbeitet von Roberto Bartolacci –

Bearbeitung genehmigt von Roberto Bartolacci

Vorher
Nachher
Unverändert

Schritt-Zeilen

[title] Reconnect the webcam cable
-[* black] First place the webcam cable back in its routing channel, laying it over the display cable and letting it go through the same clips as well.
-[* green] When the webcam cable meets the adhesive stripe of the display cable, let the former go behind the latter so that, once you will be attaching this adhesive over the fan later, this stripe will held also the webcam cable in position.
-[* black] Once the webcam cable is correctly positioned, grab its end as shown in pic#2 and resolutely and forcefully push it inside its ribbon connector in one single movement.
+[* black] Place the webcam cable back in its routing channel, laying it over the display cable and letting it go through the same clips.
+[* green] When the webcam cable meets the adhesive stripe of the display cable, let the former go behind the latter so that later, once you will be attaching this adhesive stripe over the fan, it will hold also the webcam cable in position.
+[* black] Once the webcam cable is correctly positioned, grab its end as shown in pic#2 and push it inside its ribbon connector resolutely, with one single movement.